Call us now: +91 9448115585
REPAIR & RESTORATION PRODUCT
BUILDPLAST – PLUG
QUICK SETTING PLUG MORTARREPAIR & RESTORATION
Description:
"BUILDPLAST - PLUG" is manufactured by using best quality materials having properties of quick setting to stop water immediately when applied on concrete in water jetting areas.
BUILDPLAST – PLUG can be used to stop water jetting immediately by plugging of concrete. It can be used in basements, underground cellars and places which are exposed to water jetting.
- Water stops immediately by quick setting.
- Single component.
- Excellent Bonding.
Technical Services if required will be given at site for correct of BUILDPLAST - PLUG.
5 Kg container.
Before applying BUILDPLAST – PLUG. the area to be treated should be cut back to a depth of 10 mm to 20 mm depending upon the water jetting force. The area should be of V shape and free from all loose materials. Take 3 parts of BUILDPLAST – PLUG and 1 part of water by volume and mix it properly. Immediately after mixing apply on water
jetting prepared surface without any delay and BUILDPLAST – PLUG should be held in place until it become hard. It is always better to use smaller quantity for mixing
as it sets within 2 minutes.
