Call us now: +91 9448115585
PRODUCT
BUILDPLAST COAT
LIQUID COATING MATERIALDescription:
"BUILDPLAST - COAT" : Manufactured from good quality raw materials and used for coating Of building walls, roof, water tanks, bathroom etc., to prevent leakages.
BUILDPLAST – COAT must be applied to pretreated surface. The second coat must be applied before the first coat becomes tackfree so as to secure proper adhesion of subsequent coat. After applying the coating, plastering can be done by using BUILDPLAST-150 for cement plaster work if required.
Coating may be applied by using good brush / Patty blades
Thinner 0.625 Kg.
Hardener 0.375 Kg.
Area Coverage : On smooth surface 1 Kg will cover an area of 4 to 5 sq. Meters with thickness of 120 micro thick film.
Shelf Life : The mixed solution Of Thinners and Hardener has a shelf life of to 2 hours at a temperature of 30’C.
Technical Services it required will be given at site for the correct use of BUILDPLAST COAT.
BUILDPLAST-COAT is available in 1 Kg, 5Kg, 10 Kg, 20 Kg, and 35 Kg.
Existing surface must be thoroughly cleaned. All dust, oil grease and other loose materials should be removed. In case of Concrete surface, after sand blasting, if fresh surface is not obtained then chemical cleaning by dilute (15%) Hydrochloric acid should be done followed by washing with Clean water and subsequent drying preferably by hot air. The efficiency Of any coating largely depends on surface preparation. Surface prepared must be clean. rough and dry without which good performance of the coating is not possible.