GROUTS & ANCHORS PRODUCT

BUILDPLAST – EBS

HIGH MOLECULAR EPOXY BASE SEALANT
GROUTS & ANCHORS
Description:

"BUILDPLAST - EBS" is a two component putty manufactured from good quality material used for anchoring of bolts and bars.

“BUILDPLAST – EBS”  is used for anchoring of bolts and bars from 10-50 mm diameter into concrete/rock/brick work.

  •  Quick strength
  •  Anti corrosive
  •  Vibration resistant and non expansive.

Technical Services if required will be given at site tor correct use of BUILDPLAST - EBS.

Mix part A with Part B in 3:2 ratio and after proper mixing the putty is ready for use and it should be used well with in specified time. This is because BUILDPLAST - EBS set with in 30 minutes.

12 months shelf life in original sealed container if stored below 30'C.

BUILDPLAST - EBS is available in 1 Kg and 5 Kgs packing.

The holes prepared should be rough and dust free. All loose material should be removed. Holes should be done by drilling machine and after drilling wash the holes with clean water. Surface prepared must be clean. rough and dry without which good performance of BUILDPLAST - EBS is not possible. The length and width of the hole will depend upon the size Of anchor and bar. The anchor and bar should be free from grease, oil and dust.

We are committed to delight our customers with complete solution at our hub!!!