Call us now: +91 9448115585
ADMIXTURES PRODUCT
BUILDPLAST – MRA
CHEMICAL MOULD RELEASE AGENT FOR CONCRETE FORM WORKADMIXTURES
Description:
"BUILDPLAST-MRA" is manufactured by using best quality mineral oils and chemicals and is superior to those of conventional mould oil. The blend of chemical with mineral oil provides lubrication and release of agent acts with alkali in concrete to form water repellent skin. This acts as a protection to steel and wooden form work.
“BUILDPLAST – MRA” is a ready to use liquid for direct application. It can be used on steel and wooden form work to give an optimum release and quality of surface finish to
concrete.
- Gives smooth faced concrete
- Can be used for all types of form work
- Can be used with steam curing
- Economical
- Easy to use
- Makes cleaning of shutters very easy
- On account Of good surface concrete plastering will be easy and economical
- Protects wooden form work against water absorption and swelling
- Steel wooden form work is protected from corrosion
| Base | Blended mineral oil |
| Appearance | Clear low viscosity liquid |
| SP. GRAVITY | 0.8 |
| Colour | Pale straw |
| Service Temperature | Suitable for use with ordinary as well as steam cured concrete |
| Thinning | Not recommended |
| Toxicity | Non toxic |
| Chloride Content | Nil |
| Nitrate Content | Nil |
| Storage | 12 months in scaled container |
| Nitrate Content | About 62'C |
After cleaning the moulds BUILDPLAST-MRA can be applied by using low pressure sprayer or by brush/sponge/ cotton waste. The area coverage will be 25-60 Sq. mtr per
letter depending on type of form, porosity, texture of surface and ambient temperature.
Technical Services if required will be given at site for correct use of BUILDPLAST-MRA.
10, 20, 210 litre containers.
Flammability risk of BUILDPLAST-MRA is low because of high flash point, Do not use near naked flame or smoke during use. BUlLDPLAST-MRA should not be stored or
exposed to sunlight or near hot surface as temperature above flash point may ignite the liquid.