Call us now: +91 9448115585
"BUILDPLAST - BUILDGUARD" is a cementatious waterproof of coating as protection for new building and tor repair of old building. Internal and external above and below ground.
“BUILDPLAST – BUILDGUARD” can be used for coating of roofs water tanks, water reservoirs, basements, bathrooms etc., in new or old building.
Technical Services if required will be given at site for the correct use of BUILDPLAST - BUILDGUARD.
Take 1 (One) part of compound A and mix equal quantity of water and stir it properly. For this add 4 (Four) parts of compound B and stir it thoroughly until no air bubble remains in the mix. A paste like compound is formed which is to be applied by brush. The brushing has to be done minimum of 2 coats. Water curing by sprinkler for 3 - 7 days.
5 Kg and 25 Kg Double pack.
Before application of coating the surface shall be cleaned to remove all dust, oil, grease, loose materials. Wash the entire prepared surface by water jet and remove the water standing on the surface. Apply “BUILDPLAST – BUILDGUARD” coating only on damp surface.
Depending on the surface condition “BUILDPLAST – BUILDGUARD” 1 Kg covers 6 to 7 Sq. Feet at a 1 mm thickness.